Day 2, Hall D |
D209 | “Evaluation of Energy Conservation for Propylene/Propane Separation by Membrane Separation Process” (11:40– 12:00) |
| (JGC) *Oguro S., Fukuta A., Yuasa A., Fujimura Y. |
D213 | “Development of zeolite membranes for ethylene and propylene separations” (13:00– 13:20) |
| (Waseda U.) *Sakai M., Yasuda N., Matsukata M. |
D214 | “Hydrogen/Hydrocarbon separation through silica based membranes prepared by a counter diffusion CVD method” (13:20– 13:40) |
| (Shibaura Inst. Tech.) *Nomura Mikihiro, Ishii Katsunori, Yoshida Manami |
D215 | “Pore size control and hydrocarbon permeation properties of organosilica membranes utilizing bridged alkoxides” (13:40– 14:00) |
| (Hiroshima U.) *Kanezashi Masakoto, Yoneda Yuri, Nagasawa Hiroki, Tsuru Toshinori |
D216 | “Energy saving in separation of propylene - propane using membrane - distillation hybrid process” (14:00– 14:20) |
| (AIST) *Yamaki Takehiro, Yoshimune Miki, Hara Nobuo, Negishi Hideyuki, Endo Akira, (Yamagata U.) Suzuki Kenta, Matsuda Keigo |
D218 | “Spatial design of porous metal complexes (MOF) showing selective gas adsorption property” (14:40– 15:00) |
| (Nagoya U.) *Matsuda Ryotaro, Hori Akihiro |
D219 | “Development of MOF-based membrane for hydrocarbon separation” (15:00– 15:20) |
| (AIST) *Hara Nobuo, Yoshimune Miki, Yamaki Takehiro, Hasegawa Yasuhisa, Negishi Hideyuki |
D220 | “Separation of hydrogen from low hydrocarbons using carbon hollow fiber membranes” (15:20– 15:40) |
| (AIST) *Yoshimune Miki, Hara Nobuo, Yamaki Takehiro, Negishi Hideyuki |
Day 2, Hall E |
E205 | “Reaction Mechanism and Growth-rate Distribution in Metal-Organic Vapor-Phase Epitaxy of GaN” (10:20– 10:40) |
| (U. Tokyo) *Sugiyama Masakazu, Momose Takeshi, (Politecnico Di Milano) Ravasio Stefano, Cavallotti Carlo, (U. Tokyo) Shimogaki Yukihiro |
E206 | “Plasma decomposition of hexamethyldisiloxane, oxygen, and ammonia for coating a polymer substrate with silica-based film” (10:40– 11:00) |
| (Kyoto U.) Kawase M. |
E207 | “B-atom release from metal wires boronized by non-explosive boron compounds” (11:00– 11:20) |
| (Shizuoka U.) Umemoto Hironobu |
E208 | “Surface reaction design for silicon epitaxial growth based on the reactor simulation” (11:20– 11:40) |
| (Yokohama Nat. U.) *Habuka Hitoshi, Watanabe Toru, Yamada Ayami, Saito Ayumi, Sakurai Ayumi |
E209 | “CVD and ALD precursor candidates for transition metal film deposition” (11:40– 12:00) |
| (Gas-Phase Growth) Machida Hideaki |
E217 | “Synthesis of carbon nitride using microwave plasma CVD” (14:20– 14:40) |
| (Gifu U.) *Tanaka Ippei, (Chiba Inst. Tech.) Sakamoto Yukihiro |
E218 | “PEALD-TiO2 films synthesized via CCRF discharges” (14:40– 15:00) |
| (Tokyo Electron Yamanashi) Iwashita Shinya |
E219 | “Surface coating of carbon nanotubes by aerosol process with plasma enhanced chemical vapor deposition” (15:00– 15:20) |
| (Hiroshima U.) *Shimada Manabu, Kubo Masaru, (Hiroshima U./ITS Surabaya) Kusdianto K. |
E221 | “Novel catalytic property of structured catalyst prepared by wet-type chemical deposition” (15:40– 16:00) |
| (Shizuoka U.) Fukuhara Choji |
E222 | “Thin film deposition in supercritical fluids - impact of solvent capability on deposition characteristics” (16:00– 16:20) |
| (U. Yamanashi) Kondoh Eiichi |
E223 | “Hot-filament CVD growth of low-resistivity diamond for power device applications” (16:20– 16:40) |
| (AIST) Ohmagari Shinya |
E224 | “Effects of N2O Addition during the Growth of ZnO Films by Chemical Vapor Deposition Using a Catalytic Reaction” (16:40– 17:00) |
| (Nagaoka U. Tech.) Tajima Ryouichi, Watanabe Koudai, Ono Shotarou, Kato Takahiro, *Yasui Kanji |
E225 | “Engineering Carbon Nanotube Synthesis: Catalyst Screening, Identification of Reactive Species, and Rational Reactor Design” (17:00– 17:20) |
| (Waseda U.) Noda Suguru |
Day 2, Hall I |
I202 | “Destructive and Non-destructive testing for degradation of polymeric materials used in corrosive environment” (9:20– 9:40) |
| (Tokyo Tech) *Kubouchi Masatoshi, Arao Yoshihiko, (Nihon U.) Sakai Tetsuya |
I203 | “Current Situation of Organic Materials in Plant Construction Projects” (9:40– 10:00) |
| (JGC) Miyashita Junki |
I207 | “Permeation test of Fluororesin liner” (11:00– 11:20) |
| (NICHIAS) Kuramoto Junji |
I208 | “Maintenance of Alloy 800H Material for Piping in High Temperature Service” (11:20– 11:40) |
| (Chiyoda) Shibasaki Toshikazu, *Watanabe Shunji, Hokamura Takashi |
Day 2, Hall K |
K220 | “Improvement of metal hydrides for hydrogen purification and storage system” (15:20– 15:40) |
| (U. Tsukuba) Hanada N. |
K221 | “Separation and recovery of woody structural components and their effective utilization” (15:40– 16:00) |
| (Tokushima U.) Asada C. |
K222 | “Current Development Status of Fuel Cell Power Systems at Fuji Electric” (16:00– 16:40) |
| (Fuji Electric) Tagishi M. |