Japanese page
SCEJ

SCEJ 82nd Annual Meeting (Tokyo, 2017)

Last modified: 2017-02-20 10:00:00

Session programs : PS-E

The abstracts can be viewed by clicking the Paper IDs.
The ID/PW printed on the PROGRAM book are required.

PS-E [General Session (Poster)]
 Poster Session E (Fundamental prop., Fluid & particles, Reaction)

Hall P, Day 3

TimePaper
ID
Title / AuthorsKeywordsTopic codeAck.
number
Hall P(Koryu-to 6F Foyer), Day 3(Mar. 8)
(13:20–15:20)
13:2015:20PE301Modification of surface area parameters in CDSAP model and calculation of phase equilibria
(Kyushu U.) *(Stu)Miyazaki Yusuke, (Ful)Iwai Yoshio
phase equilibrium
activity coefficient model
coordination number
1-a147
PE302Measurement and correlation of mutual diffusion coefficients for ketones in poly(butyl methacrylate)
(Yamaguchi U.) *(Stu)Motizuki Masamichi, (Ful)Kobuchi Shigetoshi
Mutual diffusion coefficient
Correlation
Poly(butyl methacrylate)
1-a242
PE303Analysis of property of chitosan-tripolyphosphate cross-linked gel fabricated properties by carbon dioxide triggered system
(Tokyo Tech) *(Stu)Nishioka Takashi, (Ful)Shimoyama Yusuke
carbon dioxide
chitosan hydrogel
crosslinking
1-b652
PE304Determination of Liquid-Liquid Equilibria for Ternary Mixture Containing Ionic Liquid with Biobased-Anion
(Nihon U.) *(Stu)Inoue Yoshihiro, (Stu)Sakuta Rina, (Ful)Matsuda Hiroyuki, (Ful)Kurihara Kiyofumi, (Ful)Tochigi Katsumi
Liquid-liquid equilibria
Ionic liquid
Renewable solvent
1-a726
PE305Effect of locust bean gum on textural properties and syneresis of xanthan gum-carrageenan based mango gel
(Silpakorn U.) *(Int)Koedcharoenporn Chiraporn, Siriwongwilaichat Prasong
Hydrocolloids
Mango gel
freezing
1-e384
PE306Evaluations for ionic liquid using Hansen solubility parameter
(Kansai U.) *(Stu)Agata Yusuke, (Ful)Yamamoto Hideki
Hansen solubility parameter
Ionic liquid
Domain structure
1-e345
PE307LLE of ternary mixture of two fluorinated carbons + alcohol at 298.15 K
(Tokyo Denki U.) *(Stu)Funayama Junko, (Stu)Nagata Simpei, (Ful)Ogawa Hideo, (Ful)Kimura Fumio
LLE
ternary mixture
perfluorohexane
1-a483
PE308Measurement of the dielectric properties for propane + alcohol liquid mixtures and the correlation for the dielectric constants
(Nihon U.) *(Stu·PCEF)Koshiba Yusuke, (Ful)Hoshina Takaaki, (UTM) (Ful)Tsuji Tomoya, (Nihon U.) (Ful)Hiaki Toshihiko
dielectric constant
binary mixture
correlation
1-a223
PE309Dynamic structure of hydrogen-bond network : water, supercooled water, and glass
(Osaka U.) *(Stu)Kikutsuji Takuma, (Ful)Kim Kang, (Ful)Matubayasi Nobuyuki
hydrogen bonding
molecular dynamics simulation
supercooled liquid
1-a348
PE310Solvent polarity of DBU and alcohol mixtures switched by carbon dioxide
(Tokyo Tech) *(Stu)Hao Yingquan, (Ful)Shimoyama Yusuke
carbon dioxide
switchable solvent polarity
DBU and alcohol mixture
1-d529
PE311Stability and molecular interaction of ionic liquid gel in toluene and methylcyclohexane solution
(Tokyo Tech) *(Stu)Nakai Risako, (Ful)Shimoyama Yusuke
ionic liquid gel
toluene and methylcyclohexane
molecular interaction
1-d572
PE312Determination of Zn and Al parameters of molecular group contribution method used for estimation of HSP value
(Kansai U.) *(Stu)Imai Shunsuke, (Ful)Yamamoto Hideki
Hansen solubility parameter
Metal
Group contribution method
1-e346
PE313Effect of Hydrocolloids on Texture Profile of Rice Flour Dough and Doughnut
(Silpakorn U.) *(Int)Plaenak N., Samuhasaneetoo S., Penroj P.
Doughnut
Texture profile
Hydrocolloids
1-e444
PE314Study on void growth in acrylate resin during wet coagulation process
(Kobe U.) *(Stu)Fukushima Wataru, (Ful)Hidema Ruri, (Ful)Suzuki Hiroshi, (Ful)Komoda Yoshiyuki, (Ful)Suzuki Kosuke
acrylate resin
wet coagulation
2-a643
PE315Numerical investigation for the effect of turbulent structure in a channel flow with permeable rough wall on drag reduction
(Osaka U.) *(Stu)Wang Lei, (Ful)Takagi Youhei, (Ful)Okano Yasunori
Permeability and roughness
Direct numerical simulation
Drag reduction
2-a311
PE316Laminar-turbulent transition in MHD convection in an electromagnetically levitated molten droplet of Cu-Co alloy under a static magnetic field
(Tohoku U.) *(Stu)Tanada K., (Ful)Shoji E., (Ful)Kubo M., (Ful)Tsukada T., (Toyama Pref. U.) (Ful)Sugioka K., (Tohoku U.) Fukuyama H.
Cu-Co alloy
MHD convection
static magnetic field
2-a129
PE317Prediction of just suspended speed in a filter reactor at high solids concentrations by means of transient response
(Kobe U.) *(Stu)Hasegawa Satoshi, (Asahi Glassplant Inc) (Cor)Watabe Yoshihide, (Kobe U.) (Ful)Horie Takafumi, (Ful)Ohmura Naoto
filter reactor
just suspended speed
high solids concentration
2-b411
PE318Flow Characteristics with Gel Reaction under laminar flow in Non-element mixer
(Keio U.) *(Stu)Yamaguchi M., Yokomori T., (Ful)Ueda T.
PVA-borax gel
Laminar flow
Capsule flow
2-b21
PE319Correlation of Mass Transfer Volumetric Coefficient for High Viscosity Liquid with Large Paddle Impeller
(NITech) *(Stu·PCEF)Matsumoto Kento, (Stu·PCEF)Kamiya Masataka, (Ful)Kato Yoshihito, (Ful·APCE)Furukawa Haruki, (Daicel) (Cor)Haitsuka Masahiro, (Ful·SPCE)Kamei Noboru
Mixing
Gas-Liquid Mixing
Large Paddle Impeller
2-b139
PE320Mixing of Non-Newtonian Fluid with an Impeller in Rotating Vessel
(NITech) *(Stu)Arai Takuya, (Ful)Kato Yoshihito, (Ful·APCE)Furukawa Haruki, (NIPPON SOSEY KOGYO) (Ful)Asayama Shinsuke, (Ful)Morikawa Norihiro
Mixing
Agitation Rotating Vessel
Non-Newtonian
2-b327
PE321Fluid deformation induced by a rotationally reciprocating anchor Impeller
(Kobe U.) *(Stu)Date Tomoya, (Ful)Komoda Yoshiyuki, (Ful)Suzuki Hiroshi, (Ful)Hidema Ruri, (Ful)Suzuki Kosuke
unsteady mixing
streakline
anchor impeller
2-b657
PE322Coupled Computational Fluid Dynamics-Discrete Element Method Simulations for Optimization of Suspension Culture
(Osaka U.) *(Stu)Yano Masaki, (Stu)Yamamoto Takuya, (Ful)Okano Yasunori, (Fujimori Kogyo) (Cor)Tokura Tomohiro, (AIST) (Ful)Kanamori Toshiyuki, (Osaka U.) (Ful)Kino-oka Masahiro
suspension culture
collision
shear stress
2-b268
PE323Effect of the vessel geometry on solid-liquid dispersion.
(Kobe U.) *(Stu)Miyazawa Yusuke, (SHI-PE) (Cor)Esaki Keiji, (Cor)Nagatomo Daichi, (Kobe U.) (Ful)Ohmura Naoto
vessel configuration
homogeneity
CFD
2-b445
PE324Measurement of mixing performance of bladeless stirrer using decolorization reaction method
(Nihon U.) *(Stu)Kageyama M., (Ful)Ando T., Aoki H., Itou K., (Aquatechs) Simoji Y., (Eddyplus) Murata K.
bladeless stirrer
mixing
decolorization
2-b675
PE325Application of the coarse grain model to the solid mixing problem in a spouted bed
(U. Tokyo) *(Stu)Takabatake Kazuya, (Ful)Sakai Mikio, (Graz U. Tech.) Khinast Johannes
DEM-CFD
Coarse grain model
Solid mixing
2-c154
PE326Effect of steam on PM combustion at low temperature in Continuously regenerating type PM removal device
(Kyushu U.) *(Stu)Yokoo Kento, (Ful)Yamamoto Tsuyoshi, (Adv. Tech. Inst.) (Ful)Tatebayashi June
PM
Fluidized bed
Steam
2-c546
PE327Experimental study of a bubble behavior in the vicinity of the wall surface under pressure-oscillatingfield
(NITech) *(Stu)Ohtani Toshiki, (Ful)Iwata Shuichi, (Ful)Mori Hideki, (Ful)Nagumo Ryo, (Nagaoka U. Tech.) (Ful)Takahashi Tsutomu, (Photron) Onuma Takashi
pressure oscillation
viscoelastic fluid
2D high-speed polarization imaging
2-d843
PE328Oxygen Transfer from the Air on Free Surface in the Spiral Flow Type Aeration Tank
(Keio U.) *(Stu)Sudo Keisuke, (Sanki Eng.) (Ful)Shibata Kazue, (Keio U.) (Ful)Fujioka Satoko, (Ful)Terasaka Koichi
oxygen transfer
free surface
surface velocity of liquid
2-d472
PE329Comparison of Algorithm of Body-Force-Type Immersed Boundary Method for Calculation of Flow around a Particle
(Okayama U. Sci.) *(Stu)Yamashita Takuya, (Ful)Kuwagi Kenya, (Ful)Hirano Hiroyuki
Algorithm
2-e839
PE330Numerical analysis of the motion of a single droplet in liquid-liquid systems
(Saitama U.) *(Stu)Yoshikawa Tamaki, (Ful)Homma Shunji
droplet
Front-Tracking
drag coefficient
2-e331
PE331Direct numerical simulation of particulate flow through micropore
(Kobe U./MaF Tech C.) *(Stu)Sakai Shohei, (Okayama U.) (Ful)Mino Yasushi, (Kobe U./MaF Tech C.) (Ful)Yoshioka Tomohisa, (Ful)Matsuyama Hideto
Lattice Boltzmann Method
Discrete Element Method
Fouling
2-e660
PE332Motion of plumes in Rayleigh-Taylor instabilities for highly viscous fluids
(Saitama U.) *(Stu)Nakajima Ryota, (Ful)Homma Shunji
Rayleigh-Taylor instability
Front-tracking method
plumes
2-e340
PE333Lagrangian near-field modeling of deepwater oil blowout plume treated by chemical dispersants
(Osaka U.) *(Stu)Cordeiro Daniel Cardoso, (Ful)Takagi Youhei, (Ful)Okano Yasunori, (Ful)Kato Naomi
Deepwater oil spill
Lagrangian modeling
TAMOC
2-e568
PE334Promoting effect of flow by an obstacle in front of a pore on solid-liquid two phase flow
(Nihon U.) *(Stu)Honma Y., Neyama Y., (Ful)Ando T., (PIA) (Ful)Koike O., (U. Tokyo) (Ful)Tatsumi R.
obstacle
solid-liquid two phase flow
effect of streamline curvature
2-e591
PE335Analysis of the forces acting on a particle held in a sound pressure field
(Shizuoka U.) *(Stu)Muramatsu Hiroya, (Ful)Saito Takayuki
Acoustic Cavitation-Oriented Bubble
Visualization
Particle Image Velocimetry
2-e34
PE336Charging characteristics and levitation phenomena of dielectric particles in electrostatic field between parallel plate electrodes
(Kyoto U.) *(Stu)Hashimoto Kazuaki, (Stu)Shoyama Mizuki, (Ful)Matsusaka Shuji
Dielectric particle
Charging
Levitation
2-f156
PE337Mechanism of continuous and dispersed particle-supply with vibrations and external electric fields
(Kyoto U.) *(Stu)Kawata Takumu, Yasuda Masatoshi, (Kyoto U.) (Ful)Matsusaka Shuji
External electric field
Vibration
Particle Charging
2-f164
PE338Dust explosion characteristics of cellulose derivatives: Influence of hygroscopicity
(Fukuoka U.) *(Stu)Yamashita Hiromasa, (Ful)Masamoto Hiroshi, (Ful)Shigematsu Mikiji, (Ful)Kowhakul Wasana
Dust explosion
Ethyl cellulose
Hygroscopic
2-f465
PE339Investigation on the improvement mechanism of particle removal by a Pulsed air jet -Effect of nozzle shape on a removal characteristics -
(Okayama U.) *(Stu·PCEF)Ishikawa Y., (Ful)Mino Y., (Ful)Nakaso K., (Ful)Gotoh K., (Omron) Kakutani A.
Dry cleaning
Pulsed air jet
Removal characteristics
2-f585
PE340Numerical Analysis of Molding Process and Tablet Properties by Finite Element Method
(Osaka Pref. U.) *(Stu)Matsuda Yu, (Ful)Nakamura Hideya, (Ful)Watano Satoru
Numerical simulation
FEM
Tablet
2-f614
PE341Product quality evaluation of batch and continuous technologies in pharmaceutical tablet manufacturing processes
(U. Tokyo) *(Stu)Matsunami K., (Powrex) (Ful)Nagato T., (Ful)Hasegawa K., (U. Tokyo) (Ful)Hirao M., (Ful)Sugiyama H.
Pharmaceuticals
Granulation
Continuous manufacturing
2-f201
PE342CO-free Hydrogen Production from Formic Acid Using High-performance Non-precious Metal Catalyst Derived from Biomass
(Hirosaki U.) *(Stu)Wang Junli, (Stu)Karnjanakorn Surachai, (Taiyuan UT) Hao Xiaogang, (Hirosaki U.) (Ful)Abudula Abuliti, (Ful)Guan Guoqing
Hydrogen production
Formic acid decomposition
CO-free
5-a181
PE343Gas diffusion in the micro porous catalyst support
(Nagoya U.) *(Stu)Tanabe Y., (Toyota Motor) (Cor)Nagao S., (Cor)Hirata H., (Toyota Central R&D Labs.) (Ful)Kato S., (Cor)Nagai Y., (Nagoya U.) (Ful)Yamada H., (Ful)Tagawa T.
Gas diffusion
micro pore
catalyst support
5-a230
PE344Reforming property of Ni-based structured catalyst for auto-thermal dry reforming of methane
(Shizuoka U.) *(Stu·PCEF)Hirao Kazuaki, (Stu)Kawasaki Wataru, Kohno Yoshiumi, (Ful)Watanabe Ryo, (Ful)Fukuhara Choji
Auto-thermal reforming
Methane dry reforming
Structured catalyst
5-a524
PE345Crystal structure of carbon/titania composite fabricated from low reactive precursor in supercritical sol-gel reaction
(Tokyo Tech) *(Stu)Kinoshita Motohiro, (Ful)Shimoyama Yusuke
supercritical sol-gel reaction
crystal structure
low reactive precursor
5-a544
PE346In-situ Characterization of Pt catalyst on silicon Microchannel Wall by Ultraviolet Microspectroscopy
(Nagoya U.) *(Stu)Asai Yusaku, (Ful)Yamada Hiroshi, (Ful)Tagawa Tomohiko
ultraviolet microspectroscopy
microreactor
dehydrogenation
5-a566
PE347Application of Size-Controlled Gel Networks to a Catalytic Reaction in Continuous-Flow System
(Kyushu U.) *(Stu·PCEF)Matsumoto Hikaru, (Ful)Seto Hirokazu, (Stu)Akiyoshi Takanori, (Ful)Hoshino Yu, (Ful)Miura Yoshiko
Polymer gel
Palladium catalyst
Continuous-flow system
5-a818
PE348Study on Deactivation Mechanism of Ni/TiO2 for Photodecomposition of Steam with Methane as a Reducing Agent
(Kobe U.) *(Stu)Maeda S., (Stu)Okemoto A., (Ful)Taniya K., (Ful)Ichihashi Y., (Ful)Nishiyama S.
Photocatalyst
Photodecomposition of Steam
Hydrogen Production
5-a487
PE349Improving the selectivity of Al-MCM-41 by doping with Mg for BTXs production from bio-oil
(Hirosaki U.) *(Stu)Karnjanakorn Surachai, (Stu)Asep Bayu, (Stu)Wang Junli, (Ful)Abudula Abuliti, (Ful)Guan Guoqing
Biooil upgrading
Mg/Al-MCM-41
High selectivity
5-a182
PE350Formation of HMF from glucose using amorphous TiO2 catalyst with high surface area
(Osaka U.) *(Stu)Ota M., (Ful)Hirota Y., (Osaka U./JST) (Ful)Uchida Y., (Osaka U.) (Ful)Nishiyama N.
titanium dioxide
biomass
hydroxylmethylfurfural
5-a272
PE351Conversion of benzofuran into phenols by liquid phase hydrogenolysis using in-situ hydrogen produced from methanol
(Tokyo Tech) *(Stu)Tamura Masaki, (Ful)Fujitsuka Hiroyasu, (Ful)Tago Teruoki
Pt
methanol
benzofuran
5-a603
PE352Atomically dispersed PGM catalysts for CO2 reduction
(ETH Zurich) *(Int)Fujiwara Kakeru, Pratsinis Sotiris
Single PGM atom catalysts
CO2 reduction
Flame spray pyrolysis
5-a862
PE353Oxidative dehydrogenation of isobutane on Cr-doped MCM-48
(Tokushima U.) *(Stu·PCEF)Nitta S., (Ful)Baba Y., (Ful)Katoh M., (Ful)Sugiyama S., (Mitsubishi Rayon) (Cor)Katou Y., (Cor)Ninomiya W.
Oxidative dehydrogenation
Isobutane
MCM-48
5-a12
PE354Enhanced activity on SBA-15 doped with Cr for oxidative dehydrogenation of isobutane
(Tokushima U.) *(Stu)Misu H., (Ful)Baba Y., (Ful)Katoh M., (Ful)Sugiyama S., (Mitsubishi Rayon) (Cor)Katou Y., (Cor)Ninomiya W.
Oxidative dehydrogenation
Isobutane
Cr-doped SBA-15
5-a13
PE355Effect of ultrasonic irradiation on nanographene synthesized by in-liquid plasma
(Nagoya U.) *(Stu)Nakada Ryo, Amano Tomoki, (NU EcoEngineering) Kano Hiroyuki, (Nagoya U.) Kondo Hiroki, Hori Masaru, (Ful)Yasuda Keiji
plasma
graphene
ultrasound
5-b374
PE356Characteristics of non-equilibrium plasma reactor for the hydrogen production from methane
(Nagoya U.) *(Stu)Yamamoto Tatsuya, (Ful)Yamada Hiroshi, (Ful)Tagawa Tomohiko
non-equilibrium plasma
hydrogen production
natural gas
5-c811
PE357Rapid polymerization of thermo-sensitive polymer using plasma discharge
(Kumamoto U. GSST) *(Stu)Mori Kanae, (Kumamoto U. IPPS) Wang Dou-Yan, Namihira Takao, (Kyoto Inst. Tech.) Okubayashi Satoko, (Kumamoto U. IPPS) (Ful)Sasaki Mitsuru
Nanosecond pulsed discharge
Polymerization
Plasma jet
5-c745
PE358Preparation of surface functionalized PET nanofibers by microfluidic wet-spinning and surface modification process
(Okayama U.) *(Stu)Imai Yoshihiko, (Ful)Watanabe Takaichi, (Ful)Ono Tsutomu
microfluidics
nanofiber
surface modification
5-f475
PE359Flame-synthesis of single-wall carbon nanotubes: controlling catalyst supply and reaction field
(Waseda U.) *(Stu)Okada Shohei, (Ful)Sugime Hisashi, (Ful)Osawa Toshio, (Fujifilm) (Cor)Kataoka Shohei, (Cor)Igarashi Tatsuya, (Waseda U.) (Ful)Noda Suguru
single-wall carbon nanotubes
flame synthesis
catalyst supply control
5-h178
PE360Particles trajectory control in a thermo-responsive deterministic lateral displacement micro fluidic device
(Tokyo Tech) *(Stu)Tottori Naotomo, (Ful)Nisisako Takasi
Deterministic Lateral Displacement
Tunable particle separation
thermo-responsive hydrogel
5-f365
PE361Fabrication of single-walled carbon nanotubes fibers using a novel microchannel wet-spinning
(Okayama U.) *(Stu)Shimizu Takahiro, (Ful)Watanabe Takaichi, (Ful)Ono Tsutomu
microchannel
carbon nanotube
carbon material
5-f470
PE362Analysis of reaction and mixing profiles in microreactors by inline spectroscopy
(Kyoto U.) *(Stu·PCEF)Ikeda Koki, (Stu·PCEF)Asano Shusaku, (Ful)Maki Taisuke, (Ful)Muranaka Yosuke, (Ful)Mae Kazuhiro
micro reactor
Dushman reaction
inline spectroscopy
5-f172
PE363The effect of catalyst phase on phenyl benzonate production in three liquid phases microreactor
(Nagoya U.) *(Stu)Nukushina Tetsuhiro, (Ful)Yamada Hiroshi, (Ful)Tagawa Tomohiko
Microreactor
Phase transfer catalyst
Mass transfer
5-f571
PE364Basic catalysis of activated carbon bearing quaternary ammonium groups
(Tokyo City U.) *(Stu)Fukuda Ryo, (Stu)Sato Ryosuke, Urakami Yutaka, (Ful)Kouzu Masato
Solid base catalyst
Activated carbon
Quaternary ammonium group
5-g708
PE365Continuous Production of Single-Wall Carbon Nanotubes and Their Fibers by Floating Catalyst Chemical Vapor Deposition
(Waseda U.) *(Stu)Namiki Katsuya, (Ful)Sugime Hisashi, (Ful)Osawa Toshio, (Ful)Noda Suguru
single-wall carbon nanotubes
floating catalyst chemical vapor deposition
reaction field control
5-h273
PE366The study on reaction field study in the reaction separation system of benzene partial oxidation
(Nagoya U.) *(Stu)Fukuyasu Koki, (Ful)Yamada Hiroshi, (Ful)Tagawa Tomohiko
Bi-phase system
Partial oxidation of benzene
Reaction separation system
5-d576
PE367The development of microreactor using etching aluminum foil
(TUAT) *(Stu)Sasagawa Hironari, (Ful)Sakurai Makoto, (Stu)Hiramatsu Hiromi
microreactor
etching
methanol steam reforming
5-f369
PE368Utilization of hydrous ethanol in ester production process with strongly basic resin
(Tohoku U.) *(Stu·PCEF)Kabu Kazunori, (Ful)Fukushima Yasuhiro, (Ful)Shibasaki-Kitakawa Naomi
fatty acid ethyl ester
hydrous ethanol
resin catalyst
5-g648
PE369Extraction of polysaccharides from woods by protic ionic liquids
(Doshisha U.) *(Stu)Yoshida K., (Ful)Matsumoto M., (Ful)Kondo K.
Polysaccharide
protic ionic liquid
extraction
5-g166
PE370Continuous production of biodiesel by CaO-catalyzed transesterification
(Tokyo City U.) *(Stu)Fujimori Akitoshi, (Ful)Kouzu Masato, Fukakusa Ryota, Satomi Naoya
Transesterification
CSTR
Solid base catalyst
5-g537
PE371Stabilizing carbon nanotube synthesis by oxidizing additives: H2O vs CO2
(Waseda U.) *(Stu)Sato Toshihiro, (Ful)Sugime Hisashi, (Ful)Noda Suguru
carbon nanotubes
catalytic chemical vapor deposition
oxidizing additives
5-h211
PE372Additional effect of plastics on direct liquefaction process of woody biomass using circulating solvent
(Nihon U.) *(Stu)Ebato Makoto, (Seikei U.) (Ful)Ito Takuya, (Nihon U.) (Ful)Kakuta Yusuke
woody biomass
direct liquefaction
circulating solvent
5-g371
PE373Hydrolysis reaction of rutin by using microwave heating and graphene oxide catalyst
(Kumamoto U. GSST) *(Stu)Hobo Takuto, (Ful)Quitain Armando, (Ful)Kida Tetsuya, (Kumamoto U. IPPS) (Ful)Sasaki Mitsuru
graphene oxide
hydrolysis
microwave heating
5-g744
PE374Promoting effect of applied energy by pulsed power discharge on seed germination of rice
(Chiba Inst. Tech.) *(Stu)Kamisaka Shinji, (Aura Tech) Eguchi Toshihiko, (Chiba Inst. Tech.) (Ful)Yazawa Yuuki
Biomass
Surface improvement
Water absorption
5-g836
PE375Converting metal to graphene films on insulating substrates by reaction with CHCl3
(Waseda U.) *(Stu)Ohashi Kei, (Stu)Akiba Sachie, (Ful)Sugime Hisashi, (Ful)Osawa Toshio, (Ful)Noda Suguru
graphene films
dry-etching
chloroform
5-h209
PE376Efficient production of carbonized/torrefied solid fuel from woody biomass with tar recovery
(Shinshu U.) *(Stu)Satomi Hiroki, (Ful)Shimada Iori, (Ful)Osada Mitsumasa, (Ful)Fukunaga Hiroshi, (Ful)Takahashi Nobuhide
co-firing
torrefaction
secondary reaction
5-g784
PE377Production of carbon materials from seaweeds and application of solid acid catalysts
(Kumamoto U. GSST) *(Stu)Ninomiya Shohei, (Ful)Quitain Armando, (Ful)Kida Tetsuya, (Kumamoto U. IPPS) (Ful)Sasaki Mitsuru, (U. Alberta) Saldana Marleny
Carbon materials
Biomass
Solid acid catalysts
5-g787
PE378Additional effect of carbon-supported Nickel catalyst for production of an alternative diesel fuel from animal fats by pyrolysis
(Nihon U.) *(Stu)Iso Terumasa, Taguchi Masato, (Seikei U.) (Ful)Ito Takuya, (Nihon U.) (Ful)Kakuta Yusuke
Ni/C catalyst
Pyrolysis
Animal fats
5-g625
PE379Preparation of Catalysts on Ceramic Beads by Dry Process and Fluidized-Bed Synthesis of Long Carbon Nanotubes
(Waseda U.) *(Stu)Yoshida Masahiro, (Ful)Osawa Toshio, (Ful)Sugime Hisashi, (Ful)Noda Suguru
carbon nanotubes
fluidized bed
chemical vapor deposition
5-h251
PE380Study of steam reforming of methane in a microreactor
(TUAT) *(Stu)Ito S., (Ful)Sakurai M.
steam reforming of methane
almite
microreactor
5-f639
PE381Generation characteristics of solid-phase radicals within the organic matter residue with regard to change in elemental composition -Influence of O / C ratio in material-
(Chiba Inst. Tech.) *(Stu)Takeshita Asuka, (Petronas Inst. Tech.) (Ful)Uemura Yoshimitu, (Chiba Inst. Tech.) (Ful)Onoe Kaoru
solid-phase radical
elemental composition
dry distillation
5-g165
PE382Development of decomposition process of formaldehyde by UV irradiation with hydrogen peroxide
(Akita U.) *(Stu)Sugawara Y., (Ful)Kato T., Okawa H., (Ful)Sugawara K.
Formaldehyde
Hydrogen peroxide
Photodecomposition
5-c448
PE383Effects of HCl gas addition and high concentration precursor supply to SiC-CVI process aiming for uniform growth in multi-scale
(U. Tokyo) *(Stu)Naka Tomoaki, (Stu)Shima Kohei, (Stu)Sato Noboru, (Stu)Funato Yuichi, (IHI) (Ful)Fukushima Yasuyuki, (U. Tokyo) (Ful)Momose Takeshi, (Ful)Shimogaki Yukihiro
CVD
SiC
5-h478
PE384Direct Synthesis of Millimeter-tall Carbon Nanotube Arrays on Aluminum foils
(Waseda U.) *(Stu)Miura Shota, (Ful)Sugime Hisashi, (DENSO) (Cor)Ota Aun, (Cor)Oshima Hisayoshi, (Waseda U.) (Ful)Noda Suguru
carbon nanotubes
aluminum substrate
chemical vapor deposition
5-h589
PE385Synthesis of CNTs directly on inner wall of narrow stainless steel tube
(Kyoto U.) *(Stu)Hirai D., (Ful)Sano N., (Ful)Tamon H.
carbon nanotube
stainless steel
chemical vapor deposition
5-h557
PE386Synthesis and characterization of Ti1-xAlxN films by thermal CVD
(U. Tokyo) *(Stu)Sato Hiroki, Hirabaru Tomoko, (Kyocera) Kubo Hayato, (U. Tokyo) (Ful)Momose Takeshi, (Kyocera) Tanibuchi Takahito, (U. Tokyo) (Ful)Shimogaki Yukihiro
CVD
coating
TiAlN
5-h321
PE387Kinetic analysis of the rate-determining step for ammonia synthesis over electride-supported Ru catalysts
(Tokyo Tech) *(Ful)Kobayashi Yasukazu, Kitano Masaaki, Kawamura Shigeki, Yokoyama Toshiharu, Hosono Hideo
Ammonia synthesis
Rate-determining step
Electride-supported Ru catalysts
5-a173
PE388Relationship of Particle Morphology and Rotation Speed on Rotary Atomizer for Spray Drying Using Particle Image Analysis.
(Malvern Instruments A division of Spectris) *(Ful)Sasakura Daisuke, (PRECI) (Ful)Kawaguchi Shinya, (Malvern Instruments A division of Spectris) Sato Fumiaki, (PRECI) Misumi Yuichi, Kato Hayato, Kato Shinsuke
Spray Drying
Particle Image Analysis
Particle Morphology
2-f258
PE389Inline monitoring of the particle size distribution for jet milling
(Malvern Instruments) *(Ful)Sato Fumiaki, (Ful)Ikeda Hideyuki, (SEISHIN ENTERPRISE) Osumi Michio, Minami Isamu, Fujita Yasuyuki
Particle size
Inline
Measurement
2-f508
PE390The role of solvation structure on the cyclization of alanine dimer in hydrothermal conditions
(NIT Hachinohe) *(Ful)Honma Tetsuo, (Nagasaki U.) Furusato Tomohiro, (Kumamoto U.) (Stu)Miyanomae Ryota, (Ful)Sasaki Mitsuru
alanine anhydride
molecular simulation
solvation free energy
1-a519

Technical program
Technical sessions (Wide)  (For narrow screen)
Session programs
Search in technical program
SCEJ 82nd Annual Meeting (Tokyo, 2017)


© 2023 The Society of Chemical Engineers, Japan. All rights reserved.
For more information contact SCEJ 82nd Annual Meeting Organizing Committee
E-mail: inquiry-82awww3.scej.org